Monroe Electronics R177 - Manual (Page 5)

5
Specifications
Video Input Level: 1 V p~p, (75 )
Video Frequency Response:
0 to 40 MHz, -3 db
Video Output Level for Loop through:
1 V p~p, 0 dB buffered
Video Connectors:
75 ‘F’ connectors
Audio Input Level:
0 dB, ~.7 volts p~p nominal
Audio Frequency Response:
0 to 30 KHz, -3 dB, 600 Term In/Out
Master Audio Output Level
Adjustable, ± 3 dB nominally
for loop through: .7 volts p~p into 600 s buffered
Audio Connectors:
Detachable screw terminals
Master Switch Control Inputs:
Contact closure to Ground. Independent
Video and Audio contact closure to GND
or recessed push buttons on panel
Slave Switching
DC voltage on Audio Lines, or push
(or Master used as Slave) buttons for testing Audio/Video for that
unit only.
Power Requirements:*
16 VAC 50/60 Hz, ± 10%,
½ A AC
Physical Size:
19.0” W x 3.5” H x 5.0” D
Weight:
2 lbs.
*12 VAC power supplies will work provided the supply is stable at 12V under low
line conditions. However, 16 VAC supplies are provided and are recommended
for optimal reliability.