NEXCOM ICES 667 - Manual (Page 71)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 57 ICEK 667-T6 Starter Kit User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Setting up the System
Make sure the power supply is switched off and disconnected
from the power sources to prevent electric shock or system
damage before installing.
CAUTION! CAUTION! CAUTION!
1. Place the case on a stable surface and pull the yellow clasp to release
the lock.
Clasp
The starter kit is preconfigured and assembled. No addtional
setup is required. However, if installation is needed, please
refer to the instructions below.