Second super io configuration – NEXCOM ICES 254 User Manual
Page 87
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
73
ICEK 254-T2 Starter Kit User Manual
Chapter 4: BIOS Setup
CPU:Vcore
Detects and displays the Vcore CPU voltage.
+12V
Detects and displays 12V voltage.
+5V
Detects and displays 5V voltage.
+3.3V
Detects and displays 3.3V voltage.
Second Super IO Configuration
This section is used to configure serial ports 3 and 4.
Super IO Chip
Displays the Super I/O chip used on the board.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
3 (COMC)
Super IO Configuration
Super IO Chip
Serial Port 3 Configuration
Serial Port 4 Configuration
Winbond W83627DHG