Installing a sata dom – NEXCOM NISE 2200 User Manual

Page 55

Advertising
background image

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

41

NISE 2200 User Manual

Chapter 3: System Setup

Installing a SATA DOM

NOTE: Only available on NISE 2210/2310/2210E/2310E

1. Locate the SATA connector on the board.

2. Connect the SATA power cable to the SATA DOM.

Advertising
This manual is related to the following products:
See also other documents in the category NEXCOM Hardware: