Chapter 3: system setup, Removing the chassis bottom cover – NEXCOM NISE 3600E User Manual
Page 53
Advertising
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
39
NISE 3600E Series User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Bottom Cover
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
CAUTION!
CAUTION!
CAUTION!
1. With the bottom side of the chassis facing up, remove the mounting
screw of the bottom cover and then put them in a safe place for later use.
2. Lift up the cover and remove it from the chassis.
Advertising