NEXCOM NViS 6220 - Manual (Page 68)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 55 NViS 6210 / 6220 User Manual
Chapter 3: System Setup
USB Configuration
This section is used to configure the USB.
USB Configuration
Displays the detected USB devices.
Legacy USB Support]
Enable
Auto
Disable Enables Legacy USB.
Disables support for Legacy when no USB devices are connected.
Keeps USB devices available only for EFI applications.
EHCI Hand-Off
This is a workaround for OSs that does not support EHCI hand-off. The
EHCI ownership change should be claimed by the EHCI driver.
Device Reset Timeout
Selects the USB mass storage device’s start unit command timeout.