Exit – NEXCOM NDiS 111 User Manual
Page 38
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
26
Chapter 4: BIOS Setup
NDiS 111 User Manual
Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also
press <F10> to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.
Restore Defaults
Loads the optimal default values from the BIOS ROM.
Advanced
Boot
Security
Save & Exit
Main
Version 2.10.1208. (C) Copyright 2010 American Megatrends, Inc.
Aptio Setup Utility - (C) Copyright 2010 American Megatrends, Inc.
Reset system setup with-
out saving any changes.
Save Changes and Exit
Discard Changes and Exit
Restore Defaults
Boot Override
PO-Hitachi HTE543225A7A384
← →:
Select Screen
↑↓:
Select Item
Enter: Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit