Cpu ppm configuration – NEXCOM NDiS M532 User Manual
Page 63
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
49
NDiS M532 User Manual
Chapter 4: BIOS Setup
CPU PPM Configuration
This section is used to configure the Processor Power Management (PPM)
configuration.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel SpeedStep
CPU PPM Configuration
EIST
Turbo Mode
CPU C3 Report
CPU C6 report
CPU C7 report
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
EIST
Enables or disables Intel® SpeedStep.
Turbo Mode
Enables or disables turbo mode.
CPU C3 Report
Enables or disables C3 report to the operating system.
CPU C6 Report
Enables or disables C6 report to the operating system.
CPU C7 Report
Enables or disables C7 report to the operating system.