Super io configuration – NEXCOM NDiS OPS-M50 User Manual
Page 66
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
51
NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
0 (COMA)
Super IO Configuration
Super IO Chip
Serial Port 0 Configuration
Serial Port 1 Configuration
IT8728
Serial Port 0 Configuration to Serial Port 1 Configuration
Selects the IO/IRQ setting of the I/O devices.