NEXCOM VTC 6120 - Manual (Page 68)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 54
Chapter 3: System Setup
VTC 6120 User Manual
7. Connect one end of the SATA data cable to the SATA connector that is
on the board then connect the other end of the cable to the SATA con-
nector at the rear of the SATA drive.
SATA data cable
Cable connected
to the SATA drive
Cable connected to
the SATA connector
on the board
8. Connect one end of the SATA power cable to the SATA power connector
that is on the board then connect the other end of the cable to the SATA
power connector at the rear of the SATA drive.
SATA power cable
Cable connected
to the SATA drive
Cable connected to the
SATA power connector
on the board