NEXCOM VMC 1000 - Manual (Page 59)

Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved 46 VMC 1000 User Manual
Appendix D: SMS Wake-up setting
Appendix D: SMS Wake-up setting
(4) After you have finished with the Setup, press <ESC> to go back to the
main menu and then press <Enter> on “Save Changes and Reset”.
B. Module setting
(1) Go into the System applet in the Windows Control Panel, and access
“Device Manager”
(2) In the “Ports (COM & LPT)” section, you will find a port labeled “Sierra
Wireless AT Command Port (UMTS)”, followed by a COM port number
such as COM11.