OT Systems ET1100C series - Manual (Page 9)

ET1100C Series Installation & Operation Manual
www.ot-systems.com 9
(5) Operational Guides
5.1 LEDs Status
LEDs State Indication
PWR
Green Power on.
Off Power off.
Link Amber Data is avaible at coxical cable
ACT
Flashing Transmitting or receiving Ethernet data, Act stands for ACTIVITY
Off Neither valid Ethernet connection established nor transmitting/receiving Ethernet data
Ethernet
Lnk/Act
Steady A valid Ethernet connection established, Lnk stands for LINK
Flashing Transmitting or receiving Ethernet data, Act stands for ACTIVITY
Off Neither valid Ethernet connection established nor transmitting/receiving Ethernet data
Spd
Steady Ethernet Connection transferring at 100Mbps
Off Ethernet Connection transferring at 10Mbps
Signal and Power Ports
10/100 Ethernet- RJ45 with Cat. 5 for Ethernet connection.
COAX - BNC connecter with Coaxial cable connection
DC12V- 2-pin screw terminal for 12VDC power connection.
(6) Specifications
Ethernet
Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x
Processing Type IEEE 802.3x Full-duplex flow control
Cabling
10BASE-T
100BASE-TX
4-pair UTP/STP Cat. 3, 4, 5
4-pair UTP/STP Cat. 5
Maximum Distance
Cat5 UTP Up to 100m
Connector
10/100BASE-TX 1X RJ45
Coaxial