Dynex DX-LCDTV19 - Manual (Page 12)

12 Troubleshooting
4 Press VOL+ or ENTER, then press CH+ or CH– to select
Component Set.
5 Press VOL+ or ENTER. The Component Setting screen opens.
6 Press CH+ or CH– to select an option, then press VOL+ or ENTER
to confirm.
7 Press VOL+ or VOL– to adjust the option. You can select:
• H-Position–Moves the screen image left or right.
• V-Position–Moves the screen image up or down.
• Clock–Minimizes any vertical bars or stripes in the screen
image.
• Phase–Minimizes any horizontal distortions and sharpens
the screen image.
• Auto Adjust–Automatically adjust the component settings
for the best screen image.
• Setting–Resets the component settings to the factory
defaults.
Troubleshooting
Specifications
Specifications subject to change without notice.
Symptom Solution
No picture and no sound • Make sure that your LCD TV
is plugged into a power
outlet.
• Make sure that the power
outlet is supplying power.
Blank screen • Make sure that you have
selected the correct video
source. Press INPUT to
select the video source.
• If the power has been
interrupted, turn off your
LCD TV, then turn it on
again.
No sound • Press MUTE to make sure
that the sound is not
muted.
• Press VOL+ to increase the
volume.
• Change the channel to
determine if the current
channel is having
difficulties.
Poor sound • Adjust the sound settings.
• If you have connected a
sound system, make sure
that it is adjusted correctly.
No picture on some channels • Make sure that the correct
channel is selected.
• Adjust the antenna.
• Adjust the picture.
No color on some channels • Change the channel to
determine if the current
channel is having
difficulties.
• Adjust the color.
Spots on some channels • Make sure that the antenna
is connected correctly and
securely.
• Make sure that the antenna
and antenna cabling is in
good condition.
• Adjust the picture.
LCD TV is functioning
abnormally • Turn off your LCD TV,
disconnect the power cord,
wait 10 seconds, then
reconnect the power cord
and turn on your LCD TV.
• If problems persist, contact
authorized repair
personnel.
Picture and sound
system
NTSC, ATSC, Clear QAM
Audio output
≥
1.5 W + 1.5 W
External input ports AV
PC (VGA)
PC audio
S-Video
HDMI
Y Pb Pr
Antenna
Power requirements ~120 V
Power consumption
≤
60 W
Temperature Working: 41°F to 95°F (5°C to 35°C)
Storage: 5°F to 113°F (-15°C to 45°C)
Humidity Working: 20% to 80%
Storage: 5% to 90%
Dimensions
L × W × H
7.48 Ч 20.55 Ч 16.61 inches
(190 Ч 522 Ч 422 mm)
Weight 11.02 lbs (5.0 kg)
Accessories Remote control
Batteries
User guide
Symptom Solution