Oxmoor 4x4 - Manual (Page 2)

Oxmoor Corporation, LLC, 309 Cahaba Valley Parkway, Birmingham, AL 35124 USA Toll Free: 1-800-262-6898
Phone: 205-982-8200 Fax: 205-982-8250 E-mail: [email protected] Internet: www.oxmoor.com
4x4 & 4x4T SPECIFICATIONS
Rev. 7.01
FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE 20 Hz to 20 kHz .......................................... +0, -0.3 dB
HUM AND NOISE HUM AND NOISE HUM AND NOISE HUM AND NOISE HUM AND NOISE Ref. +4 dBm Output @ Unity Gain ................ -94 dB (20 Hz to 20 kHz, Unweighted)
DISTORTION DISTORTION DISTORTION DISTORTION DISTORTION Ref. +4 dBm Output @ Unity Gain
THD + Noise ............................................... 0.0016% (20 Hz to 20 kHz)
SMPTE IMD* ............................................... 0.0021%
Transient IMD .............................................. 0.0031%
(3.15 kHz SQ + 15 kHz Probe, 30 kHz)
CROSSTALK CROSSTALK CROSSTALK CROSSTALK CROSSTALK Channel to Channel** .................................. -80 dB (20 Hz to 20 kHz)
AUDIO INPUTS AUDIO INPUTS AUDIO INPUTS AUDIO INPUTS AUDIO INPUTS Type ............................................................ Electronically Balanced (RF Suppressed)
Connectors .................................................. Female, 3-Pin, XLR–Type
Input Impedance ......................................... 80 K Ohms
Input Sensitivity ........................................... Nominal +4 dBu, Maximum +24 dBu
Common Mode Rejection Ratio .................... 50 dB at 1 kHz
AUDIO OUTPUTS AUDIO OUTPUTS AUDIO OUTPUTS AUDIO OUTPUTS AUDIO OUTPUTS Type ............................................................ Electronically Balanced (RF Suppressed)
Connectors .................................................. Male, 3-Pin, XLR–Type
Source Impedance ...................................... 150 Ohms (75 Ohms/Side)
Recommended Load Impedance .................. 600 Ohms or Greater
Maximum Output Level ................................ Ref. 1 kHz @ Rated THD
Terminated w/600 Ohms ............................ +24 dBm
(All Outputs Driven Simultaneously)
Unterminated .............................................. +26 dBu
TRIM POT GAIN RANGE TRIM POT GAIN RANGE TRIM POT GAIN RANGE TRIM POT GAIN RANGE TRIM POT GAIN RANGE Ref. +4 dBm, Output @ Unity Gain ...............
±
15 dB
SAFETY SAFETY SAFETY SAFETY SAFETY Listings ....................................................... UL and CE
MAINS POWER MAINS POWER MAINS POWER MAINS POWER MAINS POWER Power Requirements ................................... 100 to 125 VAC or 200 to 230 VAC, 50/60 Hz
Current Requirements ................................. 8 Watts
Fuse Type ................................................... 125 mA (1/8 Amp) SB @ 115 VAC
65 mA (1/16 Amp) SB @ 230 VAC
ENVIRONMENTAL ENVIRONMENTAL ENVIRONMENTAL ENVIRONMENTAL ENVIRONMENTAL Storage Temperature ................................... -25
°
C to 70
°
C (-13
°
F to 158
°
F)
Operating Temperature ................................ -10
°
C to 50
°
C (-14
°
F to 122
°
F)
Humidity ..................................................... Less than 80% RH, Non-Condensing
MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL Overall Dimensions ...................................... 44 H x 482 W x 183 D mm
(1.72 “H x 19” W x 7.18” D in )
Finish .......................................................... Textured Black Paint
Weight ......................................................... Shipping: 3.9 Kg (8.5 lb) Net: 3.1 Kg (6.9 lb)
* SMPTE Method; 60 Hz + 7 kHz mixed 4:1.
** Input terminated w/600 ohms, unity gain, adjacent channel driven to +4 dBm output.
Specifications subject to change without notice.