Q-See QSTD2408 - Manual (Page 34)

Digital Video Recorder User Manual
Camera name:
Set camera name. It can be a combination of numbers, letters
and symbols.
Show name:
Display camera name in live view.
Show time:
Display the time in live view.
Dwell time:
It is available for both Sequence and SPOT simultaneously. This
unit has 2-channel video output, refer to 2.3.1 Rear Panel . One is main output,
and the other is spot output. Users can set the display time of cameras in auto
dwell and spot out.
SPOT enable:
Enable spot output.
Color
: Click Set button, a window will appear shown as Fig 4.6 Color
Adjustment.
Fig 4.6 Color Adjustment
Adjust Brightness, Hue, Saturation, and Contrast in live view here.
Default:
Set the color to the default value.
4.2.3 Record Configuration
Click RECORD to enter Record Configuration shown as Fig 4.7 Record
Configuration.
Fig 4.7 Record Configuration
Here users can set record quality, frame rate, resolution, and hard drive
recycle. The following are the explanations of each option.
30