Televes Avant 3 5 In/2 Out BI/FM-V-U-U-INmix (790MHz) - Manual (Page 23)

23
Main menu
From this time, press shortly the key to scroll
the main menu in the following sequence: Inputs,
Filter 1, ..., Filter 5, and Filter VHF.
Remark:
To change the interface language before
starting the configuration of the device, you
must access the language menu. To do so,
press the key (long press) from the Input
menu to access the Extended menu, and then,
using the keys or , select the language.
Finally, press the key (long press) to save the
changes.
For more information, see section Extended
Menu => Language selection.
Configuration of inputs
The first menu displayed is the “Inputs menu.”
The mapping of the keys in this menu is:
& Scroll through the menu options: 5-0,
2-3.
(Short press) - Positions the cursor over
each modifiable parameter.
(Long press) - Calls the extended menu
(language).
(Short press) - Shifts to the next main
menu.
(Long press) - Recording of parameters.
To change the value selected with the cursor, you
must press the key then that value will start
flashing. Next, change its value directly by or
keys.
Programming of filters
Pressing the key, you access the second menu,
Programming Filters. The mapping of the keys in
this menu is:
Selection of upper and lower channel filter.
(Short press) - Positioning of the cursor.
(Long press) - Not applicable
(Short press) - Moves to the next menu.
(Long press) - Recording of parameters.
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRE 1
_ _
25 __
FILTRE 1
_ _
25 28
FILTRE 2
Error F1
_ _
27 31
FILTRE 1
__
FILTER 1
_ _
25 __
FILTER 1
_ _
25 28
FILTER 2
Error F1
_ _
27 31
FILTER 1
__
SUODIN 1
_ _
25 __
SUODIN 1
_ _
25 28
SUODIN 2
Error F1
_ _
27 31
SUODIN 1
__
Press the key (short press) to activate the first
channel of Filter 1. Use the keys and , to
select the lower channel of the filter. Press the
key (short press) to activate the upper channel of
the filter. Use the or keys to select the upper
channel of the filter.
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRE 1
_ _
25 __
FILTRE 1
_ _
25 28
FILTRE 2
Error F1
_ _
27 31
FILTRE 1
__
FILTER 1
_ _
25 __
FILTER 1
_ _
25 28
FILTER 2
Error F1
_ _
27 31
FILTER 1
__
SUODIN 1
_ _
25 __
SUODIN 1
_ _
25 28
SUODIN 2
Error F1
_ _
27 31
SUODIN 1
__
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRO 1
_ _
25 __
FILTRO 1
_ _
25 28
FILTRO 2
Error F1
_ _
27 31
FILTRO 1
__
FILTRE 1
_ _
25 __
FILTRE 1
_ _
25 28
FILTRE 2
Error F1
_ _
27 31
FILTRE 1
__
FILTER 1
_ _
25 __
FILTER 1
_ _
25 28
FILTER 2
Error F1
_ _
27 31
FILTER 1
__
SUODIN 1
_ _
25 __
SUODIN 1
_ _
25 28
SUODIN 2
Error F1
_ _
27 31
SUODIN 1
__
Above the channel value it can be seen a graphic
representation of the filter, which becomes wider
as we increase the width of the filter.
Filters can be stretched up to 7 channels bandwidth,
from channel 30 onwards. If the lower end of
the filter is below the channel 31, the maximum
channel bandwidth is limited to 5 channels.
Modifying the lower end of the filter, automatically
deletes its upper end.
The range of channels that can be entered is the
following:
UHF: --, 21, ..., 60
If there were overlapping of filters, the display
shows the filter which is in conflict and then the
unit is not able to record data.
EN