Televes FTA Satellite receiver w/modulator - Manual (Page 41)

User Manual “RSD - 7118”
41
ENGLISH
5.- Basic Operation
First installation
Turn on the TV and all the peripheral equipment connected to the system.
Turn on the satellite receiver by pushing the standby ignition button ( )
on the Receiver or on the remote control.
Select the language using the V+/V- keys. Press OK on the desired
language.
The preprogrammed channel list will depend on the selected language.
The TV/Radio channels can be selected using so much the remote control
as the keys of the receiver.
Press the button to select the service mode desired (TV chan-
nels ( ) or radio channels ( )). The default mode is the TV mode.
Press the OK button when you are viewing a program. You will then se
on screen the general (all satellite) program list. If you want only the pro-
grams of a certain satellite to appear on the list, select it with the V+/V-
buttons. Next select a program on the list using the CH
/CH buttons
and press OK to view it. You can also move through the channel list by
groups of ten by using the P+/P- buttons.
Another way of selecting a program is by pressing the CH button
when you are already viewing one to select the next program or by pres-
sing the CH
button to select the previous program, both on the remo-
te control and on the front keyboard of the receiver. If you wish to go to
a certain program, punch in its number using the numerical keyboard on
the remote control.
The program you select will immediately appear on the screen, together
with a small information window.
This information window shows the date and time and also informs
whether the program is TV or radio, giving the program name and its
position on the list, as well as the list that has been selected at that
moment (All Satellite, Astra 19, Hotbird, etc.).
If the program has EPG, Tele-text or subtitles, it will show the indications
“EPG”, “TEX” and “SubT” as well as the time and the title of the current
event and of the next to be screened.
On pressing the INFO button, the screen will show a window with all the
information on the current program.
On this window, when Button 1 (beeper) is pressed, the receiver will emit
a beep, showing the level of the signal received. The higher the signal
level, the higher pitched the beep.
To suppress this signal, press button 1 again, or else press EXIT to
return to normal viewing mode.
5.1.- How to select programs
7118_005_ES-UK:7116_000_ES-UK.qxd 13/03/2012 8:25 Página 41