Toyotomi FB-38N(FS) - Manual (Page 22)

3
SECTION A:
SAFETY TIPS FOR INSTALLATION
BE SURE TO FOLLOW THE FOLLOWING INSTRUCTIONS.
The instructions which are contained in this manual are classified into the following two types,
which are “WARNING” and “CAUTION”. These instructions are intended to provide important
information for safe operation.
“WARNING” indicates the possibility of causing the user a fatal accident or serious injury if the
water heater is incorrectly operated.
“CAUTION” indicates the possibility of causing the user injuries or material damages if the
water heater is incorrectly operated.
WARNING
1. Never use any fuel other than water-clear and high quality of kerosene. NEVER USE
GASOLINE! Use of such fuels can result in an explosion and/or fire and cause injury.
2. Improper installation, adjustment, modification, or service and maintenance by an
unauthorized person may cause SERIOUS UNIT DAMAGE, BODILY INJURY, HAZARD OR
PROPERTY DAMAGE. This unit should be installed by a licensed, authorized person(s) due
to the necessity of making electrical, water and fuel connections. Refer to the installation
manual and the operation and maintenance instructions for assistance, or consult your dealer
for further information.
3. HAZARD OF ELECTRICAL SHOCK! Before removing any access panels of water heater
for service, make sure the electrical supply to the water heater is shut off. Failure to do this
may result in HAZARD, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.
4. Check and comply with all state and local codes that may apply to water heater(s) before
beginning the installation.
5. This water heater is designed to be used no more than 1,300 m above sea level. The water
heater may have a failure of combustion at a high altitude.
Ask your local dealer for using at altitudes higher 800 m ~ 1,300 m above sea level.
6. RISK OF INDOOR AIR POLLUTION AND FIRE. Be sure the exhaust pipe is properly
installed and connected. Aluminum tape provided may be used for sealing exhaust pipe
connections.
CAUTION
1. Keep the area around the unit clean and free of flammable materials.
2. RISK OF FIRE AND ELECTRIC SHOCK. Do not apply any excessive force or pressure to
the power supply cord. Make sure the plug is free of dust. Be sure plug fits receptacle
securely.