TVLogic LVM-247W - Manual (Page 24)

24 Multi Format LCD Monitor
●
MARKER
- Used to select the marker type when the
MARKER is displayed on the screen.
- Available marker types are OFF, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3, 4:3 ALT 14:9, 6:9 ALT 14:9, 16:9 ALT 4:3, AFD
and USER.
* AFD (Active Format Description) : If this
mode is selected, the embedded Aspect ratio
signal in the video signal will be extracted and
displayed as a marker.
●
CENTER MARKER
- Used to display the CENTER MARKER on
the screen. This function operates only after
activating the MARKER function by pressing
the MARKER button on the front of the
monitor.
●
SAFETY AREA
- Used to select to display and control the size
of the SAFETY AREA.
- Available types are 80%, 85%, 88%, 90%,
93%, 100%, EBU ACTION 16:9, EBU GRAPHIC
16:9, EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU
ACTION 4:3 and EBU GRAPHIC 4:3.
- This function operates only after activating
the MARKER function by pressing the MARKER
button on the front of the monitor.
●
FIT MARKER
- Used to activate the FIT MARKER function.
- With FIT MARKER “ON”, the safety area is
displayed relative to the marker in use.
With FIT MARKER “OFF”, the safety area is
displayed relative to the incoming source.
- FIT MARKER ON/OFF displays as shown
below.
●
MARKER MAT
- This item darkens the area of the outside of
MARKER setting area. The degree of darkness
is between OFF(Transparency) and 7(Black).
- The higher the number, the darker MARKER
border becomes.
●
MARKER COLOR
- Used to control the color of MARKER lines.
- Available colors are white, gray, black, red,
green and blue.
●
MARKER THICKNESS
- This item controls the thickness of the
MARKER lines. The degrees of thickness are
between 1 and 7.
LVM-247W SDI A
[6] MARKER
5. Menu Operations
PAGE I >> PAGE II
MARKER
CENTER MARKER
SAFETY AREA
FIT MARKER
MARKER MAT
MARKER COLOR
MARKER THICKNESS
OFF
OFF
OFF
OFF
OFF
WHITE
4
●
MARKER : 4:3
●
SAFETY AREA : 90%
●
FIT MARKER : OFF
●
MARKER : 4:3
●
SAFETY AREA : 90%
●
FIT MARKER : ON