Dynex DX-R13TV - Manual (Page 8)

8 Setting up the television
Connecting to other equipment
The exact arrangement you use to interconnect various video and audio
components to the television is dependent on the model and features of
each component. Check the owner's manual provided with each
component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. You may
need to modify them to accommodate your particular assortment of
components. The diagrams are intended to show component video and
audio interconnections only.
Selecting the video input source:
• Press INPUT to view a signal from another device connected
to your television, such as a VCR or DVD player. AUX displays
on the screen for four seconds after pressing INPUT.
Connecting the television to a VCR
Connecting the television to a camcorder
To play back from a camcorder, connect the camcorder to the television
as shown.
Connecting the television to a video game
console
The television can also be used as a display device for many video games.
However, due to the wide variety of signals generated by these devices
and subsequent connection variations required, they have not all been
included in the suggested connection diagrams. You will need to consult
each component's owner's manual for additional information.
Using the menu
To access the menu using the TV buttons:
Press both of the VOL and VOL buttons at the same time. The
menu screen appears.
To access the menu using the remote control:
Press MENU/ENTER. The menu screen appears.
To select a setting using the TV buttons:
Use the CH and CH buttons and the VOL and VOL
buttons.
To select a setting using the remote control:
Use the CH + and CH - buttons and the VOL + and VOL - buttons.
Setting the language
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays.
You must select a language first, before setting other menu options.
To select a menu language:
1 Press MENU/ENTER. The on-screen language selection screen
appears.
NOTE:
If no buttons are pressed for more than 60 seconds, the menu screen returns
to normal television operation automatically.
2 Press the CH + and CH - buttons to select LANGUAGE, then press
the VOL + button.
3 Press the CH + and CH - buttons to select the desired language:
• English (ENGLISH),
• French (FRANÇAIS), or
• Spanish (ESPAÑOL).
4 Press EXIT to return to the normal screen.
Memorizing channels
This television is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the television’s memory.
To use this television with an antenna, set the TV CABLE menu option to
the TV mode. When shipped from the factory, this menu option is in the
CABLE mode.
Selecting TV or cable
To select TV or cable input:
1 Press MENU/ENTER. The menu screen appears.
2 Press the CH + and CH - buttons until the indicator next to CH
SETUP flashes, then press the VOL + button.
VIDEO IN AUDIO IN
Audio/ Video cord (not supplied)
To Audio/ Video
OUT
Front of TV
VCR
To Audio/
Video OUT
Front of the TV
Audio/Video cord (not supplied)
VIDEO IN AUDIO IN
Front of the TV
Audio/Video cord (not supplied)
To Audio/
Video OUT
VIDEO IN AUDIO IN