Emi compliance – WaveWare Adaptive Serial LED Clock User Manual
Page 6

vi
EMI Compliance
The Alpha
®
serial clock complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
are limits designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications made to the Alpha
®
serial clock that have
not been expressly approved by Adaptive Micro Systems, Inc. could void
your authority to operate the Alpha
®
serial clock.
NOTE: Damage to clock can occur if exposed to direct sunlight or
moisture. Do not expose clock to direct sunlight or moisture.
Clock is for indoor use only—do not use outdoors.
NOTE: Damage to clock can occur if clock overheats. Make sure that
there is adequate ventilation and air flows on all sides of the
clock to avoid overheating.
Clock has no customer serviceable parts. Return to
manufacturer if service is required.