WaveWare TMR1P - Manual (Page 14)

DAVISCOMMS (S) PTE LTD
Please ensure you have the following:
• TMR1P
• Parallel cable (with DB25 connectors)
• Programmer box (rectangular black box)
• Power adapter for programmer box
• Programmer cable (thin cable, 4-pin prong on one end and RJ-11 on the other end)
4.4 Programming Kit Hardware Setup
1. Locate the parallel port (LPT1) on the rear of your computer, and connect the 25-pin parallel
cable. If you have another device connected (such as a printer), please disconnect that device first.
2. Connect the other end of the parallel cable to the programmer box.
3. Connect the small end of the TMR1P programmer cable to the programmer box (the connector
looks like a phone jack).
4. Connect the power adapter to the programmer box, and plug it into a working socket. A green
light on the box indicates it is functioning.
5. Connect the 4-prong end of the TMR1P programmer cable to TMR1P by inserting it into the
four gold contacts on the TMR1P, making sure that the notched end of the connector faces away
from the circuit board. It is not necessary to power on the TMR1P unit if you use the
programmer box package.
Programming Kit Setup
Programmer Cable setup
14 500088R03
DAVISCOMMS (S) PTE LTD
Blk70 Ubi Crescent #01-07 Singapore 408570. Tel: (65) 65471127 Fax: (65) 65471129