WaveWare WiPath PDR-3000 User Manual
Page 6
ii. Open Relay
iii. Momentary Close Relay for a period (in
msecs)
Global Option Clear By Keys
If selected any relay action initiated on the
selected relay, by any capcode, will be cancelled
(reset to normal condition) by hitting any key
(PDT2000 only).
Output to Control Relay Board
This sets the actions of any one or more of the
relays contained on the RCM2000 module.
Each RCM2000 adds 32 additional relays and
may be daisy chained.
Output to Transmitter
When a transmitter is connected this sets the
output capcode and pocsag level to which the
message received on this address will be
transmitted in pocsag.
Capcode alarm
Triggers an output event if no transmissions are
received on the selected capcode in the selected
period of time (alarm interval - in msecs.