Xtramus NuStreams-2000i V1.0 - Manual (Page 17)

17
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
B. XM-2S10
The XM-2S10 comes with your NuStreams-600i chassis, and shall be installed on the slot located on the
far left side of NuStreams-600i chassis. This module card allows you to connect your NuStreams-600i to
your PC.
Interface Ports
2x RJ45 Port It consists of one Up port and one Down port.
ID
This is adjustment for cascade mode between more than one
NuStreams-600i/2000i for network connection. Adjust the H/L ID to distinct
more than one NuStreams-600i/2000i during network operation.
Note: H ID (High ID) adjustment is for UP port cascade, and L ID (Low ID)
adjustment is for Down port cascade.
LED
Yellow ON XM-2S10 is booting and preparing for test
Green ON XM-2S10 is booting properly and is ready for test Sys
Green OFF XM-2S10 is power off
*Note: Please do not draw the XM-2S10 module card from NuStreams-600i chassis when the system is power on.