Zilog Z16FMC2 - Manual

Copyright ©2014 Zilog
®
, Inc. All rights reserved.
www.zilog.com
Introduction
Zilog’s Opto-Isolated USB SmartCable, part number ZUSBOPTSC01ZACG (shown in Fig-
ure 1)
, allows you to connect a target Z8 Encore!
®
, Z8 Encore! XP
®
, Z8 Encore! MC
™
,
ZNEO
®
or Z16FMC development board to a high-speed or full-speed USB port on your
Zilog Developer Studio II (ZDS II) host system. This particular USB SmartCable’s internal
optoisolator electrically isolates it from the circuitry of your Zilog development board,
thereby preventing high input voltages from affecting the system receiving the output signal.
This user manual describes how to install the Opto-Isolated USB SmartCable for the first
time and load the necessary driver software. After connecting this Opto-Isolated USB
SmartCable and installing the driver, you can proceed with debugging as described in the
development kit documentation.
Kit Contents
The Opto-Isolated USB SmartCable , available from the Zilog Store, ships with the follow-
ing items:
• Opto-Isolated USB SmartCable
Figure 1. Opto-Isolated USB SmartCable
Opto-Isolated USB
SmartCable
User Manual
UM019506-0814