Adept EX SmartContoller - Manual (Page 19)

Chapter 2: Installation
2X 40356-00002
BOTH SIDES
8X M3 x 6MM
BOTH SIDES
186.5
30.7
76.5
28.1 16.0
120.9
155.8
328.9
Figure 2-4. Stack-Mounting the Adept SmartController EX Motion Controller
Memory Card
The Adept SmartController EX motion controller is equipped with a Secure Digital ™ (SD)
memory card. The SD card is removable, and can be moved to another Adept SmartController
EX motion controller for testing.
The SD card shipped with all systems is factory-configured and installed by Adept. The SD
card stores the eV+ operating system, application programs, data files, and Adept licenses.
Only the SD card supplied by Adept will work with the Adept SmartController EX motion con-
troller.
NOTE: This SD card is not compatible with the SmartController CX or CS motion controllers.
CAUTION: Use suitable measures for eliminating electrostatic discharge
during removal and installation of the SD card. This includes, but is not
limited to, the use of a grounded wrist strap.
Adept SmartController EX User’s Guide, Rev. B
Page 19 of 96