Maintenance – Adtec digital RD-30 (version 2.1.1) Manual User Manual
Page 15
Advertising
1
Locate the AC power cord that was included with the RD-30.
2
Plug the female end of the power cord (end with no prongs) into the back of the
unit.
3
Locate a protected outlet (usually inside of the rack) to plug the male end of the
power cable into.
Maintenance
The RD-30 is virtually a maintenance-free piece of equipment. There are no user serviceable parts on the inside of the unit.
10.29.14- v2.1.1
Advertising