Adtec digital EN-20 (version 2.03.06) Manual - Manual (Page 15)

Services Menu
The following diagram illustrates the structure and flow of the Services Menu on the Adtec
EN-20 device. TX MUX Rate, Table, and TSID are global configurations, while items under
the denoted << >> parallel menu are unique to each encoder :
Control Function Options API Command
TS MUX
Rate Configures the total transport multiplex rate.
This rate is configured automatically with
optional QAM modulator installed.
1 - 100
Mbit/s *.ECMD0 TMR
Tables selects the table generation standard to be
used.
DVB
ATSC
MPEG
*.ECMD0 TON
TSID Transport Stream ID is a user-defined value
in the PAT packet used to identify individual
transport streams.
0x0000 -
0xFFFF *.ECMD0 TSI
Active Determines whether or not the Channel is
active. It is recommended to set this option
OFF for an off-line service. IE. the unit is
used as a single channel encoder.
OFF
ON
*.ECMD# STU
Service
Name
also known as Service Name; name of the
program or event, carried in the SDT table
of a transport stream
text field; 20-
character
limit (incl.
spaces)
*.ECMD# SNA
Service
Provider
also known as Service Provider; name of the
party offering the program or event, carried
in the SDT table of a transport stream
text field; 20-
character
limit (incl.
spaces)
*.ECMD# SPR
Logical Ch
#
This setting allows you to set the logical
channel number that will be used to tune in
with a set top box or television. This setting
is only valid with DVB table generation.
1 - 9999 *.ECMD# LCN
Major
Channel
Number
Configures major channel number for ATSC text field; 0-
999 available
see note
below table
*.ECMD# MAJ
Minor
Channel
Number
Configures minor channel number for ATSC text field; 0-
999 available
*.ECMD# MIN
Important: setting the Major Channel Number to zero (0) will equate to setting a single-part
channel number in ATSC applications.