Analog Way Axion2 - ARC200 Programmer's Guide - Manual (Page 6)

2. Examples
Write command Answer Description
Value Characters
10 PL PL10<CR><LF> Load the Preset Memory #10
2,2,4,6 SS SS2,2,4,6<CR><LF> Put the source #6 into the 5th PIP of
screen #3
Read command Answer Description
Index Characters
? DEV96<CR><LF> Get the Device Type (96=ARC200)
0, rS rS0,1<CR><LF> Get the status of screen#1 (1=Ready)