Aplex Technology APC-3265 - Manual (Page 28)

APC-3X65 User Manual 28
26. JP4:
(2.0mm Pitch 2x3 Pin Header) COM6 setting jumper, pin 1~6 are used to select signal out of pin 9
of COM6 port.
JP4 Pin# Function
Close 1-2 COM6 RI (Ring Indicator) (default)
Close 3-4 COM6 Pin9=+5V (option)
Close 5-6 COM6 Pin9=+12V (option)
27. COM6 :
(2.0mm Pitch 2X5 Pin Header), COM6 Port, standard RS232 ports are provided. They can be used
directly via COM cable connection. COM6 port is controlled by pins No.1~6 of JP4,select output
Signal 5V or 12v, For details, please refer to description of JP4.
Signal Name Pin# Pin# Signal Name
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
RI/5V/12V (JP4 select Setting) 9 10 NC
28. USB4/USB5/USB6/USB7 :
(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0 ports, speed up to
480Mb/s.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into different
Receptacle.