Argox AS-9500 - Manual (Page 114)

113
Search Commands
F8 Search ahead for “xx” character from current cursor position,
leaving cursor pointing to “xx” character.
Syntax = F8xx (xx stands for the hex value for an ASCII code.
F9 Search back for “xx” character from current cursor position,
leaving cursor pointing to “xx” character. Syntax = F9xx (xx
stands for the hex value for an ASCII code.
E6 Search ahead for the first non “xx” character from the current
cursor position, leaving cursor pointing to non “xx” character.
Syntax = E6xx (xx stands for the hex value for an ASCII code.
E7 Search back for the first non “xx” character from the current
cursor position, leaving cursor pointing to non “xx” character.
Syntax = E7xx (xx stands for the hex value for an ASCII code,
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters,
starting at the current cursor position, as the cursor is advanced by
other commands. When the FC command is encountered, the
suppress function is terminated. The cursor is not moved by the FB
command. Syntax = FBnnxxyy . .zz where nn is a count of the
number of suppressed characters in the list and xxyy .. zz is the list
of characters to be suppressed. (xx stands for the hex value for
an ASCII code,
FC Disables suppress filter and clear all suppressed characters.
Syntax = FC.
E4 Replaces up to 15 characters in the data string with user
specified characters. Replacement continues until the E5 command
is encountered. Syntax = E4nnxx1xx2yy1yy2...zz1zz2 where nn
is the total count of both characters to be replaced plus
replacement characters; xx1 defines characters to be replaced and
xx2 defines replacement characters, continuing through zz1 and
zz2.
E5 Terminates character replacement .Syntax = E5.
FE Compare character in current cursor position to the character