Dell CDPR3 - Manual (Page 33)

Operator Panel
The Desktop 4500 has an Operator Panel located on the right side of the autoloader.
The following Status Lights (LEDs) provide you with operational information.
Power LED
The green Power LED lights whenever the power switch is on.
Active LED
The yellow Active LED lights when there is communication through the autoloader
control port.
Mode LED
The yellow Mode LED lights when the button diagnostic function is selected.
Button LED
The yellow Button LED, located in the operator button, is lit when the autoloader is
paused. It may also be lit during the button diagnostics. Directions for the Desktop
4500 button diagnostics may be downloaded from the service procedures on the
Rimage Technical Web site.
1 – Power LED 3 – Mode LED 5 – Operator Button
2 – Active LED 4 – Button LED
Operator Button
The operator button may be used to pause the Desktop 4500 from processing discs.
Pausing the autoloader is used so the operator can add and remove discs from
carousel, or change ink cartridges. The carousel rotates each time the operator pauses
the autoloader. To pause the Desktop 4500, press the operator button. To return to
normal operation mode, press the operator button again. When the button LED is on
and the mode LED is off, the autoloader is in the paused mode.
33 User Guide Reference