ARRIS DG1680A-TW Users Guide - Manual (Page 21)

Chapter 4: Installing and Connecting your Data Gateway
network, MoCA filters must be installed on any legacy client devices. Your cable company will
install these filters for you.
2. Insert the plug from the power cord into the Power connector on the back of the Data
Gateway (4) and insert the power cord into a convenient AC outlet.
The Power light on the front of the Data Gateway lights up, then flashes once (refer to
the LED tables shown in Using the Data Gateway). See Troubleshooting (page 34) if the
Power light does not turn on.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the Data
Gateway, (2) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note: If you are connecting to a computer, use the Ethernet cable included in the Data
Gateway package.
Configuring Your Wireless Connection
The DG1680 ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.
Release 16 STANDARD 1.3 March 2015 Touchstone DG1680 Data Gateway User Guide 21