ARRIS 2247-N8-10NA (v9.1.x) User Manual User Manual
Page 30
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
30
Access Codes: When unrestricted LAN access is Off, the 2247-N8 requires an access code. The default access code is the Device Access Code
that is printed on a label attached to the outside (bottom) of the 2247-N8 at the factory.
Note:
If you use password protection, your user name is “admin”.
How to -
set or change the 2247-N8 device access code:
Start at the
System > Access Code
page.
Use the Access Code fields as follows;
Type the current or default access code in the Enter Old Access Code input field.
Type a new access code (password) in the Enter New Access Code field, then type it again in the Retype New Access Code field. Choose
a code that is easy for you to remember but difficult for someone else to guess.
Click the
Use New Access Code
button to save the new setting to the 2247-N8.
If you want to return to the default access code, click the
Use Default Access Code
button at the bottom of the page.