Artesyn Centellis 2000 User Card-10GE Installation and Use (May 2014) - Manual (Page 35)

Chapter 4
Centellis 2000 User Card-10GE Installation and Use (6806800H33C) 35
Board Exchange
4.1 Introduction
This chapter describes how to install the Centellis 2000 User Card-10GE board and includes the
following information:
 Before installation
 Installing the board in a shelf
 Starting up the board
 Removing the board
 Operation
4.2 Before Installation
This section provides the following information:
 Requirements
 Unpacking and inspecting the board
4.2.1 Requirements
Before you power up the board, calculate the power needed according to your system
configuration.
The system is shipped with pre-installed Centellis 2000 User Card-10GE boards. You have to
observe the following procedures when ordering a board as a spare part or exchanging a
board.