Artesyn MVME2502 Installation and Use (April 2015) - Manual (Page 53)

Hardware Preparation and Installation
MVME2502 Installation and Use (6806800R96E) 53
The console settings for the MVME2502 are:
 Eight bits per character
 One stop bit per character
 Parity disabled (no parity)
 Baud rate of 9600 baud
Verify that hardware is installed and the power/peripheral cables connected are appropriate for
your system configuration.
Replace the chassis or system cover, reconnect the chassis to power source, and turn the
equipment power on.