Artesyn MVME7100 Single Board Computer Installation and Use (June 2014) - Manual (Page 67)

Controls, LEDs, and Connectors
MVME7100 Single Board Computer Installation and Use (6806800E08D) 67
3.3.3.6 VMEbus P1 Connector
The VME P1 connector is a 160-pin DIN. The P1 connector provides power and VME signals for
24-bit address and 16-bit data. The pin assignments for the P1 connector is as follows:
Table 3-14 VMEbus P1 Connector Pin Assignments
ROW Z ROW A ROW B ROW C ROW D
1 Reserved D00 BBSY* D08 +5V 1
2 GND D01 BCLR* D09 GND 2
3 Reserved D02 ACFAIL* D10 Reserved 3
4 GND D03 BG0IN* D11 Reserved 4
5 Reserved D04 BG0OUT* D12 Reserved 5
6 GND D05 BG1IN* D13 Reserved 6
7 Reserved D06 BG1OUT* D14 Reserved 7
8 GND D07 BG2IN* D15 Reserved 8
9 Reserved GND BG2OUT* GND GAP_L 9
10 GND SYSCLK BG3IN* SYSFAIL* GA0_L 10
11 Reserved GND BG3OUT* BERR* GA1_L 11
12 GND DS1* BR0* SYSRESET* Reserved 12
13 Reserved DS0* BR1* LWORD* GA2_L 13
14 GND WRITE* BR2* AM5 Reserved 14
15 Reserved GND BR3* A23 GA3_L 15
16 GND DTACK* AM0 A22 Reserved 16
17 Reserved GND AM1 A21 GA4_L 17
18 GND AS* AM2 A20 Reserved 18
19 Reserved GND AM3 A19 Reserved 19
20 GND IACK* GND A18 Reserved 20
21 Reserved IACKIN* SERA A17 Reserved 21
22 GND IACKOUT* SERB A16 Reserved 22
23 Reserved AM4 GND A15 Reserved 23