ATEIS IDA8 - Manual (Page 16)

ATEIS - IDA8 16
© 2012 ATEÏS
2. Power up the device:
Power up the IDA8C and make sure the power LED is on.
3. Set the IP, Subnet mask and gateway address:
Set the IP Address, Subnet mask and Gateway address by using the menu of the IDA8C's touch
panel to match your LAN. The default factory setting of the IP address is 192.168.100.236.
You can find information of your network by typing "ipconfig" command in the cmd window:
The IP/Subnet Mask/Gateway information are displayed, see the green rectangle in the picture
below:
Return to the IDA8C's touch panel and follow the steps below to login and change the IP/Subnet
Mask/Gateway:
Click the [SYSTEM SET] in the [MAIN MENU] page: