Avery Dennison Platinum 6039 System Administrator Guide - Manual (Page 33)

C O N F I G U R I N G T H E S C A N N E R 5
Use scanner configuration to
set the scanner operating mode, trigger mode, and scanner timeout ♦
♦
♦
select the .wav file for successful and unsuccessful scans
enable and disable each specific bar code.
S e t t i n g S c a n n e r O p t i o n s
1. Tap the printer icon in the System Tray.
2. Tap Scanner Configuration.
Note: Tap Restore to Defaults to return all the scanner settings to the default values. Tap
Test Settings to go to the Scanner Diagnostics screen.
The printer automatically resets any invalid settings or ranges to the default setting. A
message appears specifying which setting or range was reset.
Configuring the Scanner 5-1