Avery Dennison ALX 924 Operating Manual - Manual (Page 11)

09/06 Rev. 3.06-01 OPERATING MANUAL Device Description
ALX 92x
11
¯
When the parameter SYSTEM PARAMETER > Turn-on mode is set to “Offline”, the
device switches directly to offline mode when turned on.
¯
CAUTION! - Wait at least 10 seconds between switching the device off and
on again, otherwise any modified parameter settings are not saved.
Setting the interface
According to the factory settings, the ALX 92x is set for data transfer via Cen-
tronics interface. Print data can also be transferred via the serial interface,
USB or Ethernet interface.
« The interface type is selected with the following parameter:
INTERF. PARAM. > EASYPLUGINTERPR > Interface
¯
You might have to set other parameters as well, depending on the interface
chosen:
•
Settings for the Centronics interface: INTERF. PARA. > CENTRONICS
•
Settings for the serial interface (COM1): INTERF. PARA. > COM1
• Settings for the Ethernet interface: INTERF. PARA. > ETHERNET PARAM.
 Setting parameters : see topic section „Info-Printouts and Parameters“,
chapter “Using the Parameter Menu”.
 Data cables : Ordering nubers can be found in the Service Manual, topic
section „Spare Parts“, chapter „Accessories“.
 Ethernet interface : Information about using it can be found in topic section
„Advanced Applications“.
ALX 924
V 4.10
Device type
Version number of the machine firmware
Memory: 64 MB
Flashcard: 32 MB 64 MB internal RAM
32 MB optional RAM on the CompactFlash card –
only displayed when a CompactFlash card is in use.
OFFLINE 0 JOBS
Initialisation Offline mode
ONLINE 0 JOBS Online mode. The unit is ready for printing.