Daewoo DLP-37C3 - Manual (Page 16)

16
PC
Connection
When connecting with PC(D-Sub) cable.
1. First adjust resolution of the PC. (640 X 480, 800 X 600, 1024 X 768)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. Select PC mode by pressing “MULTIMEDIA” button on the remote control or ”
” button of the TV set.
Back of the tv set
PC
When connecting with a HDMI cable.
1. First adjust resolution of the PC. (640 X 480, 800 X 600, 1024 X 768)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select DVI mode by pressing “MULTIMEDIA” button on the remote control or ”
” button of the TV set.
PC
Back of the tv set
Note : If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the pic-
ture upper.