Daewoo DLP-37C3 - Manual (Page 30)

30
Picture
Auto Tuning
Manual Tuning
Setup
Edit Screen
Sound
Function
Position Access Exit
Install
Manual Tuning
Pr 01 PAL / SECAM
PR Change Access Exit Store
Setting Up TV
Stations
Manual tuning
1. Press the Number buttons(0~9) or the “ ” button to select
a program number you want.
2. Locate the selection bar on the Manual tuning at the Install menu.
• Press the “MENU” button to select the Install menu.
• Move the selection bar to the Install menu with “
” buttons.
• Place the selection bar on Manual Tuning and press the “ ”
button.
3. Press the “ ” buttons.
• A tuning screen will appear and cursor will move from left to right /
from right to left. If you want to stop tuning press the “MENU” but-
ton.
• After searching a station, you must press the “OK” button to store
the Program.
Note :
• If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal, it is possible to store
the Manual tuning.
• When you enter Manual Tuning after Auto Tuning in France or Swiss, if present channel is SECAM L/L’, TV set can only
search SECAM L/L’.
• If you enter by other than by SECAM L/L’ signal, TV set can search every by SECAM L/L’ signal except SECAM L/L’.
• You can change the Programme number in the Edit mode.
• Manual tuning does not support this function.