Directed Video CD1020 User Manual
Page 17
BATTERY REPLACEMENT
The remote control unit uses (2) AAA batteries.
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure that the positive and negative terminals of
the battery are oriented as indicated.
3. Close the cover.
Using the Remote Control
1. Face the remote control towards the player front face IR mark (remote control
signal receiver).
2. Operation angle: About ±30 degree in each the direction of the front of the IR
mark.
PRECAUTIONS
1. Properly dispose of used battery.
2. Do not misuse battery by shorting the positive “+” and negative “-” terminal
or put it into fire. Overheating may cause the battery to explode and cause a
fire hazard.
3. If the remote is not to be used for a long period, remove the battery from the
remote to prevent damage from battery leakage.
4. To avoid accidents, prevent children from playing with the battery.
© 2006 Directed Electronics—all rights reserved
17