Directed Video CD1020 - Manual (Page 31)

NOTE: Specifications and design are subject to change without notice.
NOTE: The unit will automatically power off once the ACC is turned off (ignition key off).
Ensure that the RED (+ACC) wire is connected to ACC power.
System
Laser (If DVD is installed) Semiconductor laser
Signal Formats NTSC, PAL
Audio Characteristics
Frequency Response
(If DVD is installed)
DVD Video (PCM@ 96kHz) 20 Hz - 40 kHz ± 1dB
DVD Video (PCM@ 48kHz) 20 Hz - 20 kHz ± 1dB
CD 20 Hz - 20 kHz ± 1dB
Signal-to-Noise Ratio 90dB
Harmonic Distortion 0.01%
Dynamic Range
(If DVD is installed)
DVD Video 95dB
CD 95dB
Line level A/V outputs
Audio (RCA jacks) 2 Vrms
Video (RCA jack) 1 V p-p @75 ohms
Line level A/V inputs
Audio (RCA jack) 2 Vrms
Video (RCA jack) 1 V p-p
General
Power Requirements 14.4 VDC, 3.35 amps 5A fuse
Power Consumption 42.6 watts
Dimensions 345 mm x 65 mm x 282 mm
(length/height/width) 15.25 in. x 3 in. x 18.75 in.
(length/height/width)
Mass 2.3 kg 3 lbs
Operating Temperature 0°–50°C 32°–120°F
Operating Humidity 10% to 90%
© 2006 Directed Electronics—all rights reserved
31