Avery Dennison 9406 Messages Manual - Manual (Page 23)

311 The check digit selector is out of range. Use a number
from 1 to 9.
312 The check digit modulus is out of range. Use a
number from 2 to 11.
313 The check digit length is greater than 30. Use a
smaller number.
321 The graphic ID is out of range. Use a number from 1
to 99.
322 Invalid graphic imaging mode. You must use zero.
323 The graphic’s row position is out of bounds. Use a
number no more than 8 inches.
324 The graphic’s column position is out of bounds. Use a
number no more than 4 inches.
326 The line thickness in the graphic is greater than 99.
Enter a smaller number.
327 Invalid graphics direction. For next and duplicate bit
maps, use 0 or 1. For line vectors, use a number from
0 to 359.
328 The end position of a line segment is out of bounds. It
must be within the imagable area.
329 Invalid adjustment count. Use a number from 0 to 250
for next and duplicate bit maps.
330 Invalid graphic duplicate count. Use a number no
greater than 250.
500 Not enough memory to process the current format.
M
P
CL
E
rro
r
Co
d
e
s
Appendix A
A-3