Avery Dennison 9406 Operator Handbook - Manual (Page 19)

The default setting for Dispense Mode is On-demand. To
change the setting, follow steps listed under "Finding the
Supply Options." Then follow the steps below.
1. Press
R
until you see
SUPPLY
< Dispense Mode >
2. Press
E
. You will see the previous setting, for example
DISPENSE MODE
< On-Demand
3. Press
R
or
L
until you see the option you want. Then
press
E
. You will see
SUPPLY
< Dispense Mode >
4. Press
Q
to exit to the Setup menu.
5. Press
Q
to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
Continuous Mode Features
Regardless of the supply type, when you use continuous mode,
the printer dispenses all but the last label or tag to the peel bar.
The last one goes to the tear bar.
S
e
tt
ing
S
upp
ly
Opt
io
n
s
3. Setting Supply Options
3-5