Avery Dennison 9406 Operator Handbook - Manual (Page 21)

The default setting for Print Position is 0. To change the
setting, follow the steps listed under "Finding the Supply
Options." Then follow the steps below.
1. Press
r r R
until you see
SUPPLY
< Print Pos >
2. Press
E
. You will see the previous setting, for example
Enter print pos
[+/-999]: +0
3. Use the arrow keys to change the print position. Pressing
R
increases the value (moves the image up);
L
decreases it (moves the image down).
4. Press E when the number you want is displayed. You
will see
SUPPLY
< Print Pos >
5. Press Q to exit to the Setup menu.
6. Press
Q
to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
S
e
tt
ing
S
upp
ly
Opt
io
n
s
3. Setting Supply Options
3-7