Avery Dennison 9450 RASCAL - Manual (Page 7)

1. Introduction
About This Manual
Read this manual if you
•
oversee the generation of labels or tags
•
design labels or tags
•
decide what to print on labels or tags.
This manual tells you how to design and print labels using this
software with a 9450 printer. For information on how to load
and use your printer, see your
9450 Operator’s Handbook.
System Requirements
To operate the 9450 Label Design Software, you need:
•
IBM XT-compatible (or later) computer and a monitor
•
1 Megabyte hard disk space
•
DOS Version 3.1 or later
•
IBM RS-232C or compatible asynchronous
communications adapter
•
Hercules monochrome or IBM color graphics board or
compatible
NOTE: Some Terminate and Stay Resident programs (TSR’s)
may cause problems with the 9450 software. You may
want to disable TSR’s when running 9450.
Monarch does not recommend running the 9450
software under the Windows shell.
1-1