Avery Dennison 9835 Addendum - Manual

TC9835AD2K Rev. AA 8/99  1998 Monarch Marking Systems, Inc. All rights reserved.
M O N A R C H
  9 8 3 5 - 2 K   A D D E N D U M
Use this addendum with your Monarch

9835-2K or 9840-2K

printer and
Operator’s Handbook. You may need to refer to the Packet Reference
Manual available from our Web site or in a printed version by ordering part
number TC9800PM. This addendum contains information about
♦ using special bar code densities for Interleaved 2 of 5 bar codes.
♦ using the new supply/feed length and the new supply width.
♦ using extended backfeed on printers with a knife.
♦ defining a new cut mode in the batch control field. Make sure the printer
was shipped “knife capable” if you need to cut tags.
The 2K printers operate with the following software:
♦ Monarch

2095

and 2099

♦ United States Postal Service (USPS) Passport System for printing Tray
Tags and Act Tags
♦ ACCU-SORT

Tray Management System
U s i n g t h e S p e c i a l B a r C o d e D e n s i t i e s
The special densities for I2 of 5 bar code are shown in the following table.
Bar Code
Type
Density
Selector
Wide to
Narrow
Ratio
Narrow Bar
Size
Wide Bar
Size
I2 of 5 1
2
3
4
5
6
7 2.3:1
2.0:1
3.0:1
3.0:1
2.5:1
3.0:1
2.3:1 3/14.8
4/19.7
3/14.8
2/9.9
4/19.7
4/19.7
3/14.8
7/34.5
8/39.4
9/44.3
6/29.6
10/49.3
12/59.1
7/34.5