Avery Dennison 9835 Addendum - Manual (Page 7)

7
♦ Type the number of times the data prints across the tag width and press
E, or accept the default value of 1 by pressing E. If your printer
has a knife, you will see
Cut option
l No r
If you want to cut tags, press R to display “Yes” and press E.
See “Cutting Tags” for more information.
♦ Type the number of times the data prints across the tag width and press
E, or accept the default value of 1 by pressing E. If your printer
does not have a knife, you will see
Print Multiple
[1/32000]: 1
Follow the rest of the prompts to print all the tags in one strip. You
do not see any cut prompts.
Cutting Tags
If you answer “Yes” to the cut option prompt, but do not specify a cut mode
(cut last ticket, cut after batch, or no cut before), the knife cuts after each
tag. This is the same as cut mode 1.
The knife uses the last selected cut mode. For example, if you select "Cut
Last Ticket" and then select "Yes" to "Cut After Batch," the knife only cuts
after each batch instead of after the last tag in the batch.